Aller au contenu

PhD position in mechanics: Modeling of 3-D chip bonding

Recherche / Thèse 25 à 36 mois

Leuven (Belgium)

Publiée le 10 novembre 2026

  • Contrat

    Recherche / Thèse 25 à 36 mois

  • Lieu

    Leuven (Belgium)

  • Date de début

    Dès que possible

  • Salaire

    Information non renseignée

  • Télétravail

    Non spécifié

Die-to-wafer hybrid bonding is a 3-D vertical integration technique used to build advanced computer chips. Imagine you are carefully placing a tiny tile (the die) onto a large floor (the wafer). Both the tile and the floor have special layers and tiny copper pads that help them stick together and work as one. When making the chip, the small die is brought close to the wafer, and a gentle pressure is applied to start the sticking process. This creates an initial spot of contact, like the first drop of glue holding two pieces together. From there, the bond spreads outwards in a wave, connecting the rest of the surfaces (bond-wave propagation). This method allows manufacturers to choose the best tiny chips and put them together on a bigger surface, making it easier to design powerful and reliable electronics. It's a bit like assembling a puzzle where each piece can be made perfectly before being joined to complete the picture.

However, the die-to-wafer bonding process presents significant scientific and engineering challenges. Mechanical stresses and bonding dynamics can result in bonding distortions, die stretching, and overlay errors-misalignments that may degrade electrical performance or cause device failures. As device features shrink and dies or wafers become thinner, these effects intensify, making it essential to understand and predict die-to-wafer bonding mechanics to ensure precise alignment and reliability of 3D stacks.

A key challenge in this process is the large number of parameters that impacts distortions, such as: wafer & die properties, process dynamics and tool design. Given the complexity and cost of experimental optimization, simulation-based methods are essential for effective process development.

The purpose of this PhD topic is to deepen the understanding on both the physics of bond-wave propagation and the impact of mechanical boundary conditions on bonding distortions using modeling and simulation techniques. To achieve this, the PhD student will:

  1. Develop a 2-D axisymmetric physics-based mechanical modeling environment (coupled fluidic-structrual) to study the bonding phenomena.
  2. Extend the models to full 3-D die-to-wafer bonding simulations
  3. Apply the learnings from physics based models to advance accelarated simulation strategies already available at imec, enabling rapid data acquisition from models
  4. Implement modeling results as training data to efficient machine learning algorithms to create in-situ prediction/optimization toolboxes

    This PhD topic is situated at the core of semiconductor technology, where the student will have a chance to interact with and gain exposure to diverse teams and programs at imec such as metrology, processing, patterning and reliability. The student will be provided with training on modeling tools and get a chance to collaborate with various experts from different fields.

This position is best suited for candidates from an engineering background with a keen interest in physics-based mechanical modeling and an affinity for cross-team collaborations.

Required background: M.Sc in Mechanical Engineering, Materials Science and Engineering, Physics or equivalent

Type of work: %70 modeling, 20% data analysis, 10% literature

Supervisor: Houman Zahedmanesh (KU Leuven)

Daily advisor: Oguzhan Orkut Okudur

The reference code for this position is 2027-010. Mention this reference code in your application.

Date limite de candidature

Tant que l’offre est en ligne

Niveau d'étude

Doctorat

Fonction

Recherche & développement

Plus d’infos sur l’entreprise

imec

Embracing a better life.

Our future starts with you
How would you describe imec in just one word? We asked our employees, see what imec means to the people behind the chips.
Spearheading semiconductor R&D with the world's most advanced pilot line
Imec Leuven (headquarters) from the sky. Soon this view will change, as new buildings will be added in the near future.
Imec's headquarters in Leuven: the imec tower and one of our cleanrooms. But there's lots of imec buildings hiding behind it!
Into imec's cleanroom! Wafers are being processed 24/7.
From chips to atoms: a tour inside imec's material and components analysis labs.
Diversity as fuel for innovation.
We're defining the future for a better life through technology.