As spintronic devices such as z-spin Spin-Orbit Torque Magnetic Random-Access Memory (SOT-MRAM) emerge as promising candidates for next generation embedded memory in high performance computing, etching of complex alloys including magnetic stacks become a critical process challenge. These devices require nanometer scale control of etch depth, profile, and material selectivity to preserve magnetic properties and device performance.
Simultaneously, there is a growing interest in quantum information technologies which has driven the exploration of scalable and design-flexible device architectures. Among these, 2D single-gate structures built on spin-on quantum-confined (Spin QC) substrates offer a promising path forward due to their straightforward layout and ease of extension to multi-qubit systems. However, the fabrication of high-fidelity gate profiles at critical gap dimensions remains a challenge, and minor deviations in etch landing might damage the gate oxide and modify the Spin QC interface which can directly degrade quantum device performance.
Conventional etch processes often introduce uncontrolled ion induced damage, roughness, and non-selectivity, which are detrimental to SOT efficiency, SOT switching reliability in spintronic devices, and integrity of bits in quantum technologies. Pulsed Atomic Layer Etching (PALE) offers a promising pathway to achieve highly controlled, low damage etching through cyclic and self-limited surface reactions.
This project aims to investigate and optimize PALE processes for patterning SOT MRAM device and quantum gate stacks, focusing on process control, selectivity, and damage mitigation for advanced spintronic and quantum device integration. While the applications are different, the etch challenges remain similar and are therefore being addressed under the same topic.
The reliability and performance of both these devices critically depend on the etch process quality, especially with respect to:
Common Challenges for both Spintronic and Quantum devices-
Challenges specific to spintronic device-
Challenges specific to Quantum device-
Type of internship: Master internship
Duration: 1 year
Required educational background: Chemistry/Chemical Engineering, Electrotechnics/Electrical Engineering, Materials Engineering, Energy, Nanoscience & Nanotechnology, Physics, Other
University promotor: Stefan De Gendt (KU Leuven)
Supervising scientist(s): For further information or for application, please contact Nikita Paul (< e-mail verwijderd om veiligheidsredenen >)
The reference code for this position is 2026-INT-200. Mention this reference code in your application.
Applications should include the following information:
Incomplete applications will not be considered.
Simultaneously, there is a growing interest in quantum information technologies which has driven the exploration of scalable and design-flexible device architectures. Among these, 2D single-gate structures built on spin-on quantum-confined (Spin QC) substrates offer a promising path forward due to their straightforward layout and ease of extension to multi-qubit systems. However, the fabrication of high-fidelity gate profiles at critical gap dimensions remains a challenge, and minor deviations in etch landing might damage the gate oxide and modify the Spin QC interface which can directly degrade quantum device performance.
Conventional etch processes often introduce uncontrolled ion induced damage, roughness, and non-selectivity, which are detrimental to SOT efficiency, SOT switching reliability in spintronic devices, and integrity of bits in quantum technologies. Pulsed Atomic Layer Etching (PALE) offers a promising pathway to achieve highly controlled, low damage etching through cyclic and self-limited surface reactions.
This project aims to investigate and optimize PALE processes for patterning SOT MRAM device and quantum gate stacks, focusing on process control, selectivity, and damage mitigation for advanced spintronic and quantum device integration. While the applications are different, the etch challenges remain similar and are therefore being addressed under the same topic.
The reliability and performance of both these devices critically depend on the etch process quality, especially with respect to:
Common Challenges for both Spintronic and Quantum devices-
- Mitigating residue formation post etch.
- Establishing the ALE window both in the adsorption and desorption steps.
- Ensuring sub nanometer scale surface modification and etch using material characterization techniques like Tof-SIMS, XPS, AFM, TEM, EDS, Ellipsometry, XRD, etc.
Challenges specific to spintronic device-
- Minimizing etch induced damage and modification of magnetic layers through crystalline damage and etchant diffusion.
- Achieving smooth sidewalls with low sidewall redeposition.
Challenges specific to Quantum device-
- Achieving precise landing control on the quantum gate oxide during gate patterning.
- Reducing the spacing between the quantum gates for efficient dot-to-dot coupling
Type of internship: Master internship
Duration: 1 year
Required educational background: Chemistry/Chemical Engineering, Electrotechnics/Electrical Engineering, Materials Engineering, Energy, Nanoscience & Nanotechnology, Physics, Other
University promotor: Stefan De Gendt (KU Leuven)
Supervising scientist(s): For further information or for application, please contact Nikita Paul (< e-mail verwijderd om veiligheidsredenen >)
The reference code for this position is 2026-INT-200. Mention this reference code in your application.
Applications should include the following information:
- resume
- motivation
- current study
Incomplete applications will not be considered.
