Naar de inhoud gaan

Template-Assisted, BEOL-Compatible Crystallization of Sub-4 nm Ferroelectric HZO via Seed-Layer Engineering for FeRAM

Tijdelijk contract 25 tot 36 maanden

Leuven (Belgium)

Gepubliceerd op 10 november 2026

  • Contract

    Tijdelijk contract 25 tot 36 maanden

  • Locatie

    Leuven (Belgium)

  • Startdatum

    Zo snel mogelijk

  • Loon

    Informatie niet verstrekt

  • Thuiswerken

    Niet gespecificeerd

Background & Challenge: Next-generation ferroelectric random-access memory (FeRAM) requires ferroelectric Hf₁₋ₓZrₓO₂ (HZO) films scaled to ~4-5 nm. At these thicknesses, achieving robust ferroelectricity is exceptionally challenging under the strict back-end-of-line (BEOL) thermal limit (~400 °C). Without assistance, ultrathin HZO crystallizes into non-polar phases at low annealing temperatures, yielding weak remanent polarization. While selected oxide seeding can reduce crystallization temperature and improve BEOL compatibility, it often does so at the expense of polarization and reliability. A template-assisted seeding strategy is therefore required to enable low-temperature crystallization without sacrificing performance.

Objectives: Crystallize 4-5 nm HZO within BEOL limits while achieving high FeRAM performance: 2Pᵣ > 50 µC/cm², wake-up-free switching from the first cycle, operating voltage < 1.3 V, and endurance > 10¹² cycles. The working hypothesis is that engineered material seed layers can tailor nucleation and texture to preserve large, well-oriented grains and strong ferroelectric response.

Approach: Apply template seed layers developed by atomic layer deposition (ALD) to assist HZO crystallization at low temperature while preserving performance. Two generic routes will be compared: (i) a seed promoting predominantly in-plane grain orientations, and (ii) a seed favoring out-of-plane grain orientations through structural templating. ALD deposition followed by optimized annealing (time, pressure, atmosphere) will be used for each stack. Grain orientation distributions (e.g., in-plane vs. out-of-plane textures) and ferroelectric properties will be systematically analyzed to identify the optimal BEOL-compatible route.

Risks & Mitigation: A given seed may show limited influence or stability at BEOL annealing conditions; mitigation includes tuning anneal ambient and thickness, and evaluating alternative material seeds. If polarization is limited, co-doping or multi-layer seed concepts will be explored. Parallel evaluation ensures rapid convergence on the optimal strategy.

Expected Impact: Deliver ultra-thin (4-5 nm) FeRAM capacitors that are BEOL-compatible while providing high polarization, wake-up-free operation, and long endurance. This work will enable dense embedded non-volatile memory in advanced chips without compromising performance.

Required background: Engineering Technology

Type of work: 70% material experiment, 20% electrical measurement, 10% literature

Supervisor: Clement Merckling (KU Leuven)

Co-supervisor: Mihaela Ioana Popovici

Daily advisor: Mihaela Ioana Popovici

The reference code for this position is 2027-001. Mention this reference code in your application.

Uiterste sollicitatiedatum

Zolang de vacature online is

Opleidingsniveau

Doctoraat/PhD

Jobdomeinen

Technologie

Meer informatie over het bedrijf

imec

Embracing a better life.

Our future starts with you
How would you describe imec in just one word? We asked our employees, see what imec means to the people behind the chips.
Spearheading semiconductor R&D with the world's most advanced pilot line
Imec Leuven (headquarters) from the sky. Soon this view will change, as new buildings will be added in the near future.
Imec's headquarters in Leuven: the imec tower and one of our cleanrooms. But there's lots of imec buildings hiding behind it!
Into imec's cleanroom! Wafers are being processed 24/7.
From chips to atoms: a tour inside imec's material and components analysis labs.
Diversity as fuel for innovation.
We're defining the future for a better life through technology.